A ready-to-ship 125 kW option for industrial power needs
When a facility needs a generator set on a defined timeline, available inventory can make a practical difference. Mid-America Engine has an EPG Model 125JD 125 kW diesel generator in stock and ready to ship from Warrior, Alabama.
This unit is listed as new, with factory test hours only, and carries a 2023 date of manufacture. It pairs a John Deere 4045HF285 engine with a Leroy Somer 44.3-frame generator end and is mounted on a 250-gallon subbase fuel tank. The sound-attenuated enclosure, Deep Sea controls, and 600-amp breaker are part of the listed configuration.
The asking price is $41,489.29. For current availability, application questions, or a freight estimate, request a quote.
At a glance: EPG 125JD, SKU 40516GS09
| Specification | Listed configuration |
|---|---|
| Generator set | EPG Model 125JD |
| Output | 125 kW |
| Condition / hours | New; factory test hours only |
| Date of manufacture | 2023 |
| Engine | John Deere Model 4045HF285 |
| Generator end | Leroy Somer 44.3 frame |
| Voltage and phase | 120/208 V, three phase |
| Leads | 12, fully reconnectable |
| Fuel tank | 250-gallon subbase tank |
| Enclosure | Sound attenuated |
| Controls | Deep Sea |
| Breaker | 600 amp |
| Approximate dimensions | 170 in. L × 41 in. W × 95 in. H |
| Approximate weight | 7,000 lb |
| Location | Warrior, Alabama |
Specifications are based on the product listing. Confirm nameplate data, application requirements, and shipping details with MAE before purchase.
Who should consider a 125 kW generator?
A 125 kW unit may be worth evaluating when a facility’s required load and electrical configuration align with the generator’s documented output. Potential applications include manufacturing operations, commercial facilities, construction sites, and critical infrastructure evaluating standby or other operating requirements.
The key is to size for the actual load, not simply the facility’s total connected capacity. Review essential loads, motor starting, load sequencing, voltage, phase, power factor, and expected operating profile with the project’s electrical and facilities teams. A generator’s suitability for standby or prime duty depends on its applicable rating and documentation. Do not assume a rating from the 125 kW output alone; verify the manufacturer’s rating and operating limits for the intended use.
This unit is listed at 120/208 V, three phase. Its 12-lead generator end is fully reconnectable, but the required connection and suitability for a specific system should be confirmed before procurement. The facility’s transfer equipment, protection, grounding, and distribution design also need to match the installation.
Factory-test hours only: what that tells you
The listing identifies the generator set as new with factory test hours only. That gives a buyer a clear starting point: the set has been factory tested, and the listing does not describe it as a used unit with extended field operating hours.
It does not replace project due diligence. Before purchase, confirm the unit’s documentation, nameplate details, warranty terms, commissioning requirements, and any applicable inspection steps. A facility should also plan for installation, fuel, electrical integration, and periodic maintenance. MAE’s team can help answer equipment and logistics questions without recommending more capacity or equipment than the application calls for.
Enclosure and tank: plan the site, not just the equipment
The sound-attenuated enclosure is part of the listed package. It can be relevant where equipment noise needs consideration, but no specific sound level is provided here. Confirm acoustic requirements, clearances, ventilation, access, and local permitting criteria for the intended site.
The 250-gallon subbase tank is integrated beneath the generator set. This arrangement can simplify equipment layout compared with planning for a separate tank, but it still requires an installation review. Confirm fuel-system requirements, applicable codes, containment provisions, service access, and any site-specific restrictions with qualified professionals and the authority having jurisdiction.
The listed dimensions are approximately 170 inches long, 41 inches wide, and 95 inches high, with an approximate weight of 7,000 pounds. Include rigging, access routes, foundation or pad design, and placement clearances in the site plan. Verify final dimensions and lifting information before scheduling a move.

Major components and controls
The John Deere 4045HF285 engine and Leroy Somer 44.3-frame generator end are identified in the listing. Established component names can help maintenance teams orient their service planning, but parts compatibility and service procedures should always be checked against the specific model and serial information.
Deep Sea controls are included. Before installation, confirm which monitoring, alarm, and control functions are present on this unit and how they will interface with the facility’s operating practices and transfer equipment. Do not assume a particular remote monitoring feature or control sequence without reviewing the actual panel and documentation.
The 600-amp breaker is also part of the listed package. Breaker size alone does not establish the generator’s usable output or indicate that the unit is suited to a particular load. Have the project engineer verify overcurrent protection and coordination against the system design.


Shipping from Warrior, Alabama
The unit is listed FOB Warrior, Alabama. MAE offers prepay-and-add freight to any domestic U.S. location and can provide budget-friendly freight quotes through its freight network.
To get a useful estimate, provide the delivery ZIP code, site access details, unloading capabilities, and preferred timing. The generator weighs approximately 7,000 pounds, so confirm that the receiving site can accommodate the delivery and unload plan. Freight cost and transit timing depend on destination and shipping arrangements; request a current quote before making schedule commitments.
Check availability and confirm fit
This EPG 125JD is available now, with a listed price of $41,489.29 and fast lead time from in-stock inventory. Review the product listing for current details, or browse MAE’s broader generator sets inventory.
Mid-America Engine has more than 40 years of experience supporting industrial power requirements. Our approach is engineering-driven and straightforward: confirm the application, review the equipment configuration, and provide an honest recommendation.
Request a quote or freight quote for the EPG 125JD, SKU 40516GS09. Include your required voltage, load information, intended duty, destination, and project timeline so the team can help determine the right next step.
Frequently asked questions
Is the EPG 125JD in stock?
The product listing identifies SKU 40516GS09 as in stock and ready to ship from Warrior, Alabama. Confirm current availability with MAE when requesting a quote.
What engine and generator end does this unit have?
It is listed with a John Deere Model 4045HF285 engine and a Leroy Somer 44.3-frame generator end.
What voltage does the generator provide?
The listed configuration is 120/208 V, three phase, with 12 fully reconnectable leads. Confirm the required connection and compatibility with your facility before purchase.
Does the 250-gallon subbase tank specify generator runtime?
No runtime is stated in the product information. Actual runtime depends on operating load and fuel consumption. Request applicable documentation for your planned operating conditions.
Can MAE arrange shipping outside Alabama?
Yes. MAE offers prepay-and-add freight to domestic U.S. locations and can provide a budget-friendly freight quote through its freight network. Share your delivery location and site details to receive an estimate.



